Setup And Connections; Operation - Omnitronic PME-4 Bedienungsanleitung

5

SETUP AND CONNECTIONS

1
The placement of speakers is very critical and can compromise their performance. The sound is very
much influenced by the acoustic surroundings of your room. The speakers should be placed on an even
surface and aligned to the ears of the listener in a regular triangle form. In order to avoid reflections
from the ceiling or floor, the tweeter should be located as high as your ears. Do not place the speakers
too close to walls or in corners. Monitors are designed to be installed as closely as possible to the
listener. The basic idea is to create a direct signal path between loudspeaker and ear and to avoid
indirect sound. Then the monitor's sound can be experienced as original as possible.
2
Connect the satellite's black RCA plug to the RCA output of the active speaker.
3
Connect the signal source to the line input. It is possible to connect the line output of e.g. a mixer, CD
player or computer.
4
Plug the mains plug to a socket.
..............................................................................................................................................................................
6

OPERATION

1
Prior to switching on, turn the VOLUME control to minimum to avoid a possible switching-on noise.
Then switch on the speaker system with the power switch. The front power indicator lights.
2
Adjust the overall volume with the VOLUME control.
3
Adjust the desired sound with the tone controls. By adjusting the tone controls, the high frequencies
(control TREBLE) and the low frequencies (control BASS) can be boosted or attenuated.
4
When operating the speaker system, please make sure that the loudspeakers always sound well. When
distortions can be heard, either the amplifier or the loudspeakers are overloaded. Overloads can quickly
lead to amplifier or speaker damage. In order to avoid damage, please reduce the volume immediately
when distortions can be heard. When speaker systems are destroyed by overload, the guarantee
becomes void.
5
After operation, set the VOLUME control to minimum, then switch off the speaker system with the
power switch. The power indicator extinguishes.
14