Operating Determinations - Omnitronic PME-4 Bedienungsanleitung

3

OPERATING DETERMINATIONS

The pairs of active speakers PME-4, PME-5 and PME-8 are suitable as a monitor system in studios as well
as for hi-fi and AV applications and as PC speakers.
Power
This product is allowed to be operated with an
alternating current of 100-240 V, 50/60 Hz and was
designed for indoor use only. If the device will be
directly connected with the local power supply network,
a disconnection switch with a minimum opening of 3
mm at every pole has to be included in the permanent
electrical installation. The device must only be
connected with an electric installation carried out in
compliance with the IEC standards. The electric
installation must be equipped with a Residual Current
Device (RCD) with a maximum fault current of 30 mA.
Maximum Power
The given maximum power of the speaker system
describes short-term peaks the system can handle as a
maximum. The correspondent RMS power is - as of all
comparable systems (also from other manufacturers) -
significantly lower. The maximum power of the speaker
system must never be exceeded. When operating the
speaker system, please make sure that the
loudspeakers always sound well. When distortions can
be heard, either the amplifier or the loudspeaker is
overloaded. Overloads can quickly lead to amplifier or
speaker damage. In order to avoid damage, please
reduce the volume immediately when distortions can be
heard. When speaker systems are destroyed by
overload, the guarantee becomes void.
Ambient Conditions
The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative humidity
must not exceed 50 % with an ambient temperature of
45° C. This device must only be operated in an altitude
between -20 and 2000 m over NN.
Installation
Do not shake the device. Avoid brute force when
installing or operating the device. When choosing the
installation spot, please make sure that the device is not
exposed to extreme heat, moisture or dust. There
should not be any cables lying around. You endanger
your own and the safety of others! This speaker system
must only be installed at a solid, plane, anti-slip,
vibration-free, oscillation-free and fire-resistant location.
Operate the device only after having familiarized with its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are
the result of unprofessional operation!
Children and Amateurs
Keep away children and amateurs!
Transport
Please use the original packaging if the device is to be
transported.
Cleaning
Never use solvents or aggressive detergents in order to
clean the device! Rather use a soft and damp cloth.
Serial Barcode
Never remove the serial barcode from the device as this
would make the guarantee void.
Modifications and Guarantee
Please consider that unauthorized modifications on the
speaker system are forbidden due to safety reasons! If
this speaker system will be operated in any way
different to the one described in this manual, the
product may suffer damages and the guarantee
becomes void. Furthermore, any other operation may
lead to dangers like crashes, hearing loss etc.
Maintenance and Service
There are no serviceable parts inside the speaker
system. Maintenance and service operations are only to
be carried out by authorized dealers!
12