Sony PXW-X200 Bedienungsanleitung Seite 9

• When the camcorder software update is complete, "Version
Upgrade/OK: Turn Power Off" appears. If you leave it as it is, the
error message "E-31001" may appear. Since the update is
complete, just turn the camcorder off and on.
• Use the Content Browser Mobile application V2.2 or later.
• For details, refer to the latest operating instructions (PDF file).
You can download the latest operating instructions (PDF file)
from the Sony web site.
Adding the USER menu
USER menu is newly added and you can register frequently-used
items under CAMERA SET, AUDIO SET, VIDEO SET, LCD/VF SET, TC/
UB SET, NETWORK SET, OTHERS, or PICTURE PROFILE menus to
the USER menu. Registration can be done at the USER MENU
CUSTOMIZE menu.
Adding the locking menu function
Function to lock the Setup menu and to only display USER menu
is added.
• Press the jog dial and MENU button at the same time to display
the Setup menu and enter the password at User Menu with
Lock>On to lock the menu display and only to display the USER
menu.
This function is useful when you do not want to change menu
settings other than those in the USER menu.
• To release the lock and to display all the menu lists again, press
the jog dial and MENU button at the same time to display the
Setup menu, then enter the same password entered at User
Menu with Lock>Off.
Note
Keeping your password is recommended for future reference. If
you forget your password, contact a Sony service representative.
Supports the SDXC card
Recording the original file
By using an optional MEAD-SD02 Media Adaptor, you can record
and play an SDXC card.
SDXC card can only be used when in exFAT mode.
SDXC card (SD Speed Class: 10)
Notes
• When you use the SDXC card with this unit, format it using the
unit's formatting function (OTHERS>Format Media>Media(A) or
Media(B)).
• High-speed playback may not be properly achieved with an
SDXC card.
• When you use an SDXC card, do not use other types of memory
cards simultaneously. If you use other types of media
simultaneously, switching to other media cannot be executed
when the media has no space while recording.
• Recording with XAVC-I format or the Slow & Quick Motion
recording may not be performed correctly depending on the
SDXC card used. An SxS PRO or SxS PRO+ memory card is
recommended.
• An SDXC card recorded with the camcorder of the PMW and
PXW series may not be able to be used for recording and
playback with this unit depending on the type of unit used. For
details, contact your Sony dealer or a Sony service
representative.
Recording the proxy file
An SDXC card is added to the media which can record proxy.
SDXC card (SD Speed Class: Higher than 4)
Notes
• When you use the SDXC card with this unit, format it using the
unit's formatting function (NETWORK SET>Proxy File>Format SD
Card).
• This camcorder formats the SDXC card as exFAT.
Adding the format to support 2 slot simultaneous
recording
Format which supports simultaneous recording using 2 SxS slots
is added.
The following formats are added:
• When any of the following formats for the exFAT/HD mode is
set in "System" of the OTHERS menu
–
MPEG2 HD422
–
MPEG2 HD420HQ
• When any of the following formats for the UDF/HD mode is set
in "System" of the OTHERS menu
–
MPEG2 HD422
–
MPEG2 HD420HQ
Note
When using Simultaneous Recording in the 2 slots, use memory
cards with the same type and size.
Adding the proxy recording function in network client
mode
Proxy recording function in network client mode is added when
Sony network RX station PWS-100RX1 (optional) is connected.
• To record proxy when network client mode is enabled, set the
following settings.
–
CAMERA SET>Proxy>On
–
NETWORK SET>NW Client Mode>NCM with Proxy>Enable
Notes
• The streaming bit rate that can be set on the Network RX
Station PWS-100RX1 is limited depending on the proxy
recording format.
–
When the proxy recording format is 1280 × 720
9Mbps/6Mbps: The streaming bit rate is 1Mbps or less of Very
Low.
–
When the proxy recording format is 640 × 360 3Mbps or less:
The streaming bit rate is 3Mbps or less of Low.
• The proxy format cannot be changed while in the network
client mode. To change the proxy format, turn the network
client mode off.
Adding the file transferring function in network client
mode
You can transfer the file to the server set on CCM by connecting
the unit to the CCM of Network RX Station PWS-100RX1
(optional) in network client mode.
Notes
• File transferring cannot be not performed while streaming by
network client mode.
• File transferring stops if you start streaming in network client
mode while transferring. File transferring restarts if you stop
streaming.
Partial transfer of an original file recorded on this unit
When you use the "Content Browser Mobile" application, you can
transfer a cutout part of a file by specifying In and Out points in
the original file recorded by this unit.
You can also transfer the cutout parts of multiple files using the
Storyboard.
Use the latest version of the "Content Browser Mobile"
application.