Sony PXW-X200 Bedienungsanleitung Seite 11

Attaching the essence marks to the recorded data of this
unit
When you use the Content Browser Mobile application V2.0 or
later, you can attach the essence marks while recording to this
unit. They are also applied to the proxy data. You can set the clip
position of a file simply using this essence mark information.
Notes
• This is only enabled for the same recording duration proxy file
which succeeds the original file information recorded to this unit.
• When the original file is divided, the essence marks are not
applied to the proxy data.
About setting the streaming format and proxy format
When "Bit Rate" of the proxy format setting is set to "9Mbps" in
V1.2 (camcorder software), "Bit Rate" of the streaming setting
cannot be set to more than "6Mbps. " However, the setting can be
done in V2.0 (camcorder software). If you select the preset whose
"Bit Rate" is set to more than "6Mbps, " "Bit Rate" of the streaming is
not changed to "3Mbps" automatically.
About the monitoring of Content Browser Mobile
The monitoring video image may stop due to signal conditions
when used or mobile devices.
Changed format for monitoring
"640×360 (3Mbps)" for "Size" is deleted from the monitoring
format. If you use this setting, "Size" is set to "480×270 (1Mbps). "
Changing the wireless LAN channel
The wireless LAN channel setting is changed partially ("Channel"
in the NETWORK SET menu).
Power supply to the wireless microphone installed on the
multi-interface shoe
Originally, power to the multi-interface shoe could not be
supplied while the network function was used. Due to this
version up, the power to the multi-interface shoe can be supplied
when the camcorder is driven by the battery. Therefore, you can
use the wireless microphone UWP-D11/D12 when the network
function is used.
Change of other menus
<LCD/VF SET menu>
• "NW Client Status" is added to "Display On/Off. "
The status display of the connection to the CCM turns on /off in
"NW Client Mode".
<NETWORK SET menu>
• Adding "6Mbps" in "Proxy File" > "Bit Rate"
• The menu name "Wi-Fi Remote" is changed to "Network
Remote. "
In changing the menu name, when "Wired LAN" is set in
"Network Mode" of the NETWORK SET menu, access to the Web
menu of the unit and Wi-Fi remote commander can be
performed.
<OTHERS menu>
• "NW Client Mode" is added to "Assign Button">"<1>" to "<5>. "
You can also assign the "NW Client Mode" function to the
assignable button.
Major functions updated with V1.2
Note
Network functions are extended, so menu layers and item names
are changed. For details, refer to the latest manual (PDF).
Simultaneous Recording in 2 slots
Simultaneous recording using 2 SxS slots is supported.
• The function can be turned on/off in > "Simul Rec" in the
CAMERA SET menu.
Notes
• Simultaneous Recording can be used only with the following
formats while in exFAT/HD mode.
XAVC-I
XAVC-L50
XAVC-L35
XAVC-L25
• When using Simultaneous Recording, use memory cards with
the same type and size.
• Simultaneous Recording cannot be used with the following
functions simultaneously:
Frame Recording
Clip Continuous Recording
Picture Cache Recording
Slow & Quick Motion
Interval Recording
Proxy recording
Network connections (when "Network&Proxy" is set in
"NW&Proxy/USB" of the NETWORK SET menu.)
Streaming
Streaming function
The function for streaming a live video of the camcorder via the
Internet or a local network is added.
• The function can be turned on/off in "Streaming" > "Setting" of
the NETWORK SET menu, and a preset can be selected in "Preset
Select. "
• Preset editing etc. is available in "Streaming Edit" of the
NETWORK SET menu
Notes
When "Bit Rate" for the Proxy recording format is set to "9Mbps. "
• "Bit Rate" for the streaming setting cannot be set to "6Mbps" or
more.
• If you select a preset with "Bit Rate" that is set to "6Mbps" or
more, "Bit Rate" for streaming automatically changes to "3Mbps. "
Compatible with LTE modem/Wired LAN
Network connection is available by attaching the network
module extension adaptor supplied with the optional network
adaptor kit CBK-NA1 and the optional 3G/4G/LTE modem to the
external device connector. Also, a USB-RJ45 adaptor supplied
with the optional network adaptor kit CBK-NA1 is supported so
that the network connection is available using a network cable.
• A 3G/4G/LTE modem can be used by selecting "Modem" in
"Network Mode" of the NETWORK SET menu.
• A wired LAN can be set in "Wired LAN Set" of the NETWORK SET
menu.
Notes
• For compatible modems, contact your Sony dealer or a Sony
service representative.
• When "Bit Rate" for streaming is set to "9Mbps" or "6Mbps, " set "Bit
Rate" for the Proxy recording format to options other than
"9Mbps" in advance.
GPS function
The built-in GPS module can be enabled.
The function can be turned on/off in "GPS" of the OTHERS menu
Compatible with Multi Interface Shoe
An accessory compatible with the Multi Interface Shoe can be
used with the accessory shoe on the front