Timer Mode; Manual Mode; Continuous Mode; Linking Several Machines - EuroLite NB-150 ICE Bedienungsanleitung

Timer mode

Timer mode makes it possible to manually configure the fog output volume, as well as the output duration and the
interval at which the output is to begin. Use the FUNCTION button to select the "MU", "SE", and "VO" menu
items, and set the desired value using + and ‒ respectively.
FUNCTION
To activate Timer Mode, press the
works with the set values. To deactivate Timer Mode, once again press the

Manual mode

To operate the machine in Manual Mode, configure the duration. Select the "DE" menu option with the
FUNCTION button and set the desired value using + and ‒.
FUNCTION
To activate Manual Mode, press the OUTPUT key. The machine now emits fog for the set duration. To deactivate
Manual Mode, once again press the FUNCTION key.

Continuous mode

In the Continuous Mode, the machine will emit fog continuously. To activate Continuous Mode, press the
The green LED below the key lights up as control. To deactivate Continuous Mode, once again press the
It is possible to interconnect several machines and synchronize them via one control unit. Use a stereo shielded
XLR cable for the connection.
Connect the control unit to the REMOTE IN jack of the master unit. Then connect the REMOTE OUT jack to the
REMOTE IN jack of the first secondary unit, etc. until all units have been connected in a chain.
MU /
+ and ‒
01-99
key. The green LED below the key lights up as control. The machine now
DE
+ and ‒
01-99

LINKING SEVERAL MACHINES

SE /
+ and ‒
01-99
20 • EN
VO
+ and ‒
01-10
key.
key.
key.