Specifications; General Safety Rules - Makita BFR440 Betriebsanleitung

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Lever
5. Stopper base
6. Plate
7. Casing
8. Adjusting knob
9. Switch trigger
10. Reversing switch lever

SPECIFICATIONS

No load speed (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Explanation of general view
11. Thumb screws
12. Bit
13. Dust cover
14. Plane bearing
15. Feeder box
16. Screw strip
17. Screw guide
18. Driving position
19. Reverse button
20. Hook
Model
Screw strip
-1
)
Net weight

GENERAL SAFETY RULES

END001-1
WARNING:
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or seri-
ous injury. The term "power tool" in all of the warnings
listed below refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
Work area safety
1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
3. Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electric shock if
your body is earthed or grounded.
6. Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
21. Wall
22. Limit mark
23. Front cover
24. Screws
25. Spring
26. Arm
27. Recessed part
28. Carbon brush cap
BFR440
4 mm x 25 mm - 41 mm
4,000
357 mm
1.8 kg
D.C. 14.4 V
GEA002-3
5