Specifications - Makita DHP470 Betriebsanleitung

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Battery capacity
8. Switch trigger

SPECIFICATIONS

Model
Concrete
Capacities
Wood screw
Machine screw
No load speed
-1
(min )
Blows per
minute
Overall length
Net weight
Battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HAMMER DRIVER
DRILL SAFETY WARNINGS
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
4
Explanation of general view
9. Lamp
10. Reversing switch lever
11. Speed change lever
12. Action mode changing ring
13. Adjusting ring
14. Graduation
15. Arrow
16. Sleeve
Steel
Wood
High (2)
Low (1)
High (2)
Low (1)
1.5 kg
BL1415N
DHP470
10 mm x 90 mm
1.7 kg
BL1430/
BL1430B/
BL1440/BL1450/
BL1460B
D.C. 14.4 V
2. Use auxiliary handle(s), if supplied with the tool.
ENE039-1
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
GEA010-1
operator an electric shock.
4. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
5. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6. Hold the tool firmly.
7. Keep hands away from rotating parts.
8. Do not leave the tool running. Operate the tool
GEB056-5
only when hand-held.
17. Groove
18. Hook
19. Screw
20. Bit holder
21. Bit
22. Blow-out bulb
DHP480
13 mm
13 mm
38 mm
M6
0 - 1,550
0 - 400
0 - 23,000
0 - 6,000
199 mm
1.5 kg
BL1815/BL1815N/
BL1820/BL1820B
D.C. 18 V
1.8 kg
BL1830/BL1830B/
BL1840/BL1840B/
BL1850/BL1850B/
BL1860B