Klarstein 10034270 Bedienungsanleitung Seite 16

EN
16
OPERATION
Note: The control panel is located in the lower right corner of the heater. Open the
door to access the control panel.
Functions
Control Description
ON/OFF Set the power switch to ON, the power indicator will
illuminate and the flame effect will illuminate. Set the power
switch to OFF, all functions will be turned off.
Flame Intensity Turn the knob to the right (+) to enhance the flame effect Turn
the knob to the left (-) to dim the flame effect. Note: The ON/
OFF switch turns the flame effect on and off. The flame effect
will not be turned off until the switch is set to OFF.
Thermostat The thermostat controls the temperature and keeps it constant.
Turn the knob to the right (+) to increase the temperature.
Turn the knob to the left (-) to decrease the temperature. The
heater will automatically turn on and off to maintain the set
temperature. Note: If the room temperature is higher than the
thermostat setting, the heater will not turn on.
Note: During the first use, an odour may be created by the materials used in the
device. The smell is normal and disappears after a short time.