Werbung
8. Install child car seat and secure child for Group II (15-25 kg) and III (22-36 kg)
There are two ways to install child car seat as below:
• Install child car seat with ISOFIX connector and 3 point safety belt (fig. 38A)
Direction
Install child car seat
Secure child in child car seat
• Install child car seat with 3 point safety belt (fig. 38B)
Direction
Install child car seat
Secure child in child car seat
8.1. Remove 5 point harness system
8.1.1 Press central adjuster with one finger, in the meanwhile pull shoulder belts
with another hand until it can't be pulled. Open buckle and remove shoulder belts
from T-bar,remove two buckle tongues from shoulder belts. (fig. 39)
8.1.2 Remove crotch pad, backrest cover and store shoulder belts under EPE foam
on seat base (fig. 40)
8.1.3 Keep shoulder pads in child car seat. Put T-bar in the plate on backrest. Engage
two tongues in buckle and store the buckle in the storage place in seat base. (fig. 41)
8.1.4 Put soft cover on child car seat. (fig. 42)
8.2 Install child car seat and secure child with ISOFIX connector + 3 point
safety belt
8.2.1 Install child car seat
8.2.1.1 Place child car seat facing forward. (fig. 43)
8.2.1.2 Pull reclining lever and adjust backrest to position 1 ONLY. (fig. 44)
ATTENTION!
Only position 1 is allowed to use for Group II, III.
8.2.1.3 Release ISOFIX connector by pressing button (a) and then secondary lock
(b). (fig. 5)
8.2.1.4 Insert both ISOFIX connector into ISOFIX anchorage points until you hear
Forward facing ONLY
ISOFIX connector + 3 point safety belt
3 point safety belt
Forward facing ONLY
3 point safety belt
3 point safety belt
52
Werbung
