Maintenance - Agilent Technologies Turbo-V 70 PCB 24 Vdc Bedienungshandbuch

16 Instructions for Use

Maintenance

Maintenance

The Turbo-V 70 series controllers do not require any form of
maintenance. Any intervention must be performed by authorized
personnel.
In case of failure you can use the Agilent customer support service or
the "Agilent advance exchange service", the latter consisting of
replacing a faulty controller with a refurbished one.
Unplug the power cord from the electrical socket before performing any type
WARNING!
of intervention on the controller.
If a controller needs to be scraped, proceed to do so in compliance
with the specific national laws.
170/208 Turbo-V 70 PCB 24 Vdc Controller User Manual / 87-900-933-01 (H)