Sanus CFA16SM Bedienungsanleitung Seite 6

3
6
Drill pilot holes as illustrated.
CAUTION:
Improper use
could reduce the holding power
of the lag bolt. To avoid potential
injuries or property damage:
pilot holes MUST be drilled to a
depth of 89 mm (3½ in.), using a
5.5 mm (7/32 in.) diameter drill
bit.
89 mm
(3½ in.)
5.5 mm
(7/32 in.)
Start hinge side lag bolts [05]. Leave
4
approximately 13 mm (1/2 in.) of
space from the bolt head to the wall.
[05]
[05]
13 mm
(1/2 in.)
13mm
(1/2 in.
)