Sanus CFA16SM Bedienungsanleitung Seite 5

Mounting to Wall (Wood stud)
Locate studs. Verify the center of the stud with an
1
awl or thin nail or use an edge to edge stud fi nder.
CAUTION:
and property damage!
 Any material covering the wall must not
exceed 16 mm (5/8 in.).
 Minimum wood stud size: common 2 x 4 in
(nominal 1½ x 3½ in).
Avoid potential personal injuries
41 cm
(16 in.)
2
Mark the locations for the fi rst lag
bolts on the center line of the stud
measuring 578.4 mm (231⁄8 in.)
apart for the CFR1615 and 809.6
mm (317⁄8 in.) for the CFR1620.
CFR1615
578.4 mm
(231⁄8 in.)
CFR1620
809.6 mm
(317⁄8 in.)
5