Hilti HIT-HY 200-A Gebrauchsanweisung Seite 26

Hilti HIT-HY 200-A
Adhesive anchoring system for rebar and anchor fastenings in concrete.
Hilti HIT-HY 200-A
Contains: Dibenzoylperoxide, Hydroxypropylmethacrylate
H319
H317
P262
P280
P302 + P352
P305 + P351 + P338
P333+313
P337+313
Disposal considerations
Empty packs:
▶ Leave the mixer attached and dispose of via the local Green Dot recovery system
▶ or EAK waste material code: 150102 plastic packaging
Full or partially emptied packs:
▶ Must be disposed of as special waste in accordance with offi cial regulations.
– EAK waste material code: 08 04 09* waste adhesives and sealants containing organic solvents or
other dangerous substances.
– or EAK waste material code: 20 01 27* paint, inks, adhesives and resins containing dangerous
substances.
Content: 330 ml / 11.1 fl .oz.
26
Printed: 08.07.2013 | Doc-Nr: PUB / 5084556 / 000 / 03
Warning
Causes serious eye irritation.
May cause an allergic skin reaction.
Do not get in eyes, on skin or on clothing.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
500 ml / 16.9 fl . oz Weight: 590 g / 20.8 oz 890 g / 31.4 oz