Concept KS3020 Bedienungsanleitung Seite 24

EN
PRODUCT DESCRIPTION – KS3020
1. Air outlet grid
2. Air inlet grid
3. –
4. Thermostat controller
5. Thermostat switch indicator
6. Power switch
7. Carrying handle
8. Appliance feet
9. Power cord
PRODUCT DESCRIPTION – KS3030
1. Air outlet grid
2. Air inlet grid
3. Front air outlet grid
4. Thermostat controller
5. Thermostat switch indicator
6. Power switch
7. Carrying handle
8. Appliance feet
9. Power cord
46
ASSEMBLY
The appliance must not be operated without properly installed feet.
Place the feet on the convector body and fasten them with the screws provided.
USER'S MANUAL – KS3020
• Place the appliance on a stable surface or floor to prevent it from tipping over.
• Unfold the power cord completely.
• Connect the appliance plug to the mains.
• Use the switch (6) to select the desired power 1 – 800 W, 2 – 1200 W or 3 – 2000 W (you
will hear a click when you turn the thermostat on/off).
• With the thermostat button (4) you can set the desired room temperature. When the
heating function is set to 800, 1200 or 2000 W, the appliance will switch on and off
alternately to maintain the selected temperature.
Note: For more accurate temperature settings, follow these steps:
Set the thermostat to maximum temperature. When you reach the desired room
temperature, turn the thermostat button slowly to the left to lower the temperature until
the appliance stops heating (you will hear a click indicating that the thermostat is off).
• Switch the appliance off and disconnect it from the mains after use.
USER'S MANUAL – KS3030
• Place the appliance on a stable surface or floor to prevent it from tipping over.
• Unfold the power cord completely.
• Connect the appliance plug to the mains.
• Use the switch (6) to select the desired power 1 – 1200 W, 2 – 2000 W or 3-turbo – 2000 W
(you will hear a click when you turn the thermostat on/off). To achieve the desired room
temperature faster, select the 3-turbo mode – 2000 W, at which the front air outlet grid
(3) is activated.
• With the thermostat button (4) you can set the desired room temperature. When the
heating function is set to 1200, 2000 or 2000 W (turbo), the appliance will switch on and
off alternately to maintain the selected temperature.
Note: For more accurate temperature settings, follow these steps:
Set the thermostat to maximum temperature. When you reach the desired room
temperature, turn the thermostat button slowly to the left to lower the temperature until
the appliance stops heating (you will hear a click indicating that the thermostat is off).
• Switch the appliance off and disconnect it from the mains after use.
KS3020 / KS3030 KS3020 / KS3030
EN
47