Inhaltsverzeichnis
Werbung
Fault
Possible cause
The frozen food is frozen
solid.
There is a thick layer
of frost in the freezer
compartment.
Floor of the refrigerator
The condensation outlet is
compartment is wet.
blocked. Fig. 3
If the display, Fig. 2/8,
The freezer compartment
flashes
became too warm due
to a power failure
or malfunction.
The ventilation openings
have been covered.
Refrigerator has
Appliance has been
no cooling capacity.
switched off
Power failure; the fuse
has been switched off;
the mains plug has not
been inserted properly.
Customer service
Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
Remedial action
Loosen frozen food with a blunt object.
Do not use a knife or pointed object.
You could damage the refrigerant tubing
or the plastic surface.
Defrosting the freezer compartment
(see Defrosting).
Clean the condensation channel and outlet
Fig. 3, see Cleaning the appliance.
When the button, Fig. 2/2, is pressed,
the warmest temperature reached
in the freezer compartment is displayed,
Fig. 2/8, for five sec. and then cleared.
The display stops flashing. If the displayed
temperature is more than +3 ºC, prepare
a ready meal by boiling or frying the frozen
food and refreeze. No longer store the frozen
produce for the max. storage period.
Remove obstacles.
Press the main switch, Fig. 2/1.
Check whether the power is on, check
the fuses.
These numbers can be found on the
rating plate. Fig. z
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
en
33
Werbung
Inhaltsverzeichnis
