To Set The Clock; Using The Scale - Salter Aquatronic Gebrauchsanleitung

1. To set the clock, place the scale on a
flat surface.
If it is not already showing a clock display,
press the 'clock' button on the display screen.
2. To enter the clock setting mode, press and
hold the SET button on the display screen
2 seconds.
3. The hour digits will flash.
4. Use the UP and DOWN buttons on the
screen to set the correct hour.
5. To confirm the hour setting:
Press SET.
6. Now the minute digits will flash.
7. Use the UP and DOWN buttons on the
screen to set the correct minutes.
4

TO SET THE CLOCK

8. To confirm the minute setting:
Press SET.
9. Now the symbol for 12 hour clock will flash.
10. To change to 24 hour clock: Use the UP or
DOWN on screen button.
11. To confirm the setting:
Press SET.

USING THE SCALE

TO SWITCH TO SCALE MODE
If the scale is hanging:
Moving the scale to a horizontal position will
prompt the display to automatically switch to
scale mode.
If the scale is already horizontal, but in
clock mode:
Press the scale button. '8888' will appear on
the display.Wait until the display shows zero
before weighing. (see diagram)
To use this scale with a bowl you can either
place the bowl on the platform before switching
to scale mode, or (if already in scale mode)
place the bowl on the platform then press the
zero button and wait for a zero display.
H
scale
5