Conventions Adopted In These Operating Instructions; Classiication Of The Precautionary Notices; Other Notational Conventions; Safety Warnings - HellermannTyton Autotool 2000 CPK Betriebsanleitung

1.8 Conventions adopted in these Operating
Instructions

1.8.1 Classiication of the precautionary notices

Precautionary notices in these Operating Instructions
draw attention to hazards associated with use of the
device and indicate how they can be avoided.
The precautionary notices are subdivided into three
groups according to the severity of the potential hazard:
DANGER
Texts accompanied by the signal word "DANGER" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, will cause death or severe
injury.
WARNING
Texts accompanied by the signal word "WARNING" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, can cause death or serious
injury.
CAUTION
Texts accompanied by the signal word "CAUTION" indicate
hazardous situations which, in the event of non-compliance
with the appropriate precautions, can cause slight or serious
injury.

1.8.2 Other notational conventions

f Indicates an instruction
• Indicates an item in a bulleted list
; Indicates the result of an action
This text highlight is used for names of menus,
clickable on-screen buttons, pushbuttons and switches.
This text highlight is used for display
messages.
à This text highlight is used for cross-references.
NOTE
Texts accompanied by the signal word "NOTE" indicate
situations which, in the event of non-compliance with the
appropriate precautions, can cause damage to the device or
the surroundings.
Texts accompanied by this symbol contain useful additional
information.
Operating Instructions • AT2000 CPK • 02-2017 • v02 • 106-29004
2

Safety warnings

2.1

General power tool safety warnings

The safety warnings in this section contain general power
tool safety warnings to be set out verbatim in the Operating
Instructions as required by EN 60745. Consequently, some
instructions might not be relevant for the AT2000 CPK.
WARNING
Read all safety warnings and all instructions.
Failure to follow the warning and instructions may
result in electric shock, ire and/or serious injury.
Save all safety warnings and other instructions for
future reference. The term "power tool" in the
warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.

2.1.1 Work area safety

a) Keep work area clean and well lit. There is an
increased risk of accident in cluttered or poorly lit areas.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of lammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

2.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodiied plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) Use a suitable extension cord. Use of a suitable
extension cord reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Safety warnings
6