Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Device; Check The Capacity Of The Portable Jump Starter With Power Bank; Charge Portable Jump Starter With Power Bank - ULTIMATE SPEED UMAP 12000 A1 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
Store the portable jump starter
with power bank
place and protect the device
from moisture and corrosion.
If you notice the portable jump
starter with power bank
leaking, producing an unusual
odour or looks deformed in
any way, stop using the device
immediately and contact the
manufacturer.
Do not drop the portable jump
starter with power bank
while it is being used.
When using the jumper cable
, ensure that the blue plug
10
is securely plugged into the
vehicle jumpstart outlet
When using the jumpstart,
make sure that all 3 indicator
lights
are lit.
13
If the indicator lights for the
charging status
during the start attempt,
charge the portable jump
starter with power bank
If the vehicle does not start
after the 3rd – 5th start attempt,
stop the start process and
check the other causes that
may be preventing the vehicle
from starting.
Product-specific safety instructions / Using the device
in a dry
1
is
1
1
.
8
go out
8
.
1
z Using the device
z Check the capacity of the
portable jump starter with
power bank
Note: Once the portable jump starter with
power bank has been switched on
the power button
7
, the device switches off
automatically after approximately 20 sec-
onds if no consumables are connected.
To monitor the capacity of the portable
jump starter with power bank, press the
power button
.
7
During charge, the indicator lights will
flash
.
8
The number of permanently lit indicator
lights
shows the charge level of the
8
portable jump starter with power bank.
When the portable jump starter with
power bank is fully charged, all indicator
lights
will be permanently lit.
8
Indicator lights
None permanently lit
1 permanently lit
2 permanently lit
3 permanently lit
4 permanently lit
z Charge portable jump
starter with power bank
Connect the USB power cable
power supply adaptor
port (5 V
/ 1 A)
jump starter with power bank
Plug the power supply adaptor
mains socket.
1
using
Charge level
0 %
25 %
50 %
75 %
100 %
16
of the
15
to the charging
4
of the portable
1
.
into a
15
GB/MT
53

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis