Herunterladen Inhalt Inhalt Diese Seite drucken

Customer Service - Surgimedics Surgifresh Turbo Benutzerhandbuch

Rauchabzugssystems 230v 50hz pn 906750
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
2. Turn on the POWER switch. Place the filter TEST SWITCH in TEST MODE. (See Figure 1.)
Operate the unit for ten to fifteen seconds to assure the motor speed is stabilized.
3. Should the red REPLACE FILTER indicator lamp light, replace the ULPA filter with a new
one. Note: An ULPA filter that tests OK but produces an abnormal odor or is over 90 days old
requires replacement because the carbon life has been exceeded. Note: The filters design life
is 12 hours of heavy smoke/plume removal.
4. Move the TEST SWITCH to the NORMAL mode after the test is completed.
4.3 Replacing the ULPA filter
1. Unplug the power cord from the electrical receptacle before replacing the ULPA filter.
2. Obtain a new ULPA filter. Remove its outer storage bag and dispose of the bag and twist tie
properly.
Note: Fill out date sticker and apply to the unit for future reference.
3. Open the biohazard bag provided with the new ULPA filter and prepare to dispose of the old
filter.
4. Grasp the used ULPA filter tabs. Carefully lift the used ULPA filter out of the unit, dispose of the
ULPA filter in the biohazard bag, and seal the bag.
Warning: Follow instructions and procedures for biohazardous materials
5. Grasp the tabs of the new ULPA filter and insert it into the unit.
6. Install a new pre-filter on top of the ULPA filter. Make sure the prefilter is not placed over an
ULPA Filter pull tab. Follow instructions in Section 2.0 as appropriate.
5.

CUSTOMER SERVICE

5.1 Parts Repairs and Accessories:
Surgimedics USA
1803 Grandstand # 101
San Antonio, TX 78238
Phone: 800-645-7418
Service Department Repairs and Loaner Program:
1. If a problem is experienced, first review the troubleshooting section of this manual.
For troubleshooting support, please contact Surgimedics Service (800)-645-7418
2. In the event your unit needs service or repair, do not attempt to repair. Please contact
Surgimedics Service for a Return Authorization or to request a Loaner Program Fax Back form.
MAINTENANCE
recommended by your institution.
CUSTOMER SERVICE
9

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis