Side Brush; Adjusting The Side Brush; Replacing The Side Brush - RCM Brava 1000 HT/MA Handbuch

The side brush sweeps dirt from the edges of fl oors and from corners, and directs it to the centre of the sweeper where
it can be picked up by the main brush.

Adjusting the side brush

Check that the shape of the trace left by the side brush is as shown the "trace A". As the bristles of the side brush wear
down, adjust the height of the brush from the fl oor by means of cable adjuster 1 by slackening ring nut 2.

Replacing the side brush

• Remove the three screws 5 to free the brush from its support 4.
!
Caution!
when the motor-sweeper is not in use, the side brush must always be raised above the ground, to prevent its
bristles from becoming bent.
3
A
Side brush (Fig.6)
4
5
1
2
32