Klarstein Grillmeile Bedienungsanleitung Seite 11

INSTALLATION
Note: Installation may only be carried out by authorised personnel and an all-pole
disconnecting device must be installed in the fixed wiring in accordance with the
national wiring regulations.
• Before installing the unit for the first time, remove all packaging and foreign objects
from the unit and dispose of the packaging material safely in accordance with local
regulations. Any such material remaining in the equipment may melt and/or burn
when the equipment is used.
• Check the equipment and power cord for visible damage. Do not use the product if
you notice that the power cord or any part of this product is damaged.
• Check that the supply voltage from the fixed wiring is the same as the one indicated
on the unit. Do not connect the equipment to the fixed wiring if the voltage does not
match the rating indicated on the equipment.
• Place the equipment in a location with excellent ventilation and away from scale
and explosive objects and place it on a smooth, horizontal, stable surface to
dissipate heat - When operating the equipment, maintain a minimum distance of 50
cm from the equipment to ensure adequate air circulation.
• Connect the equipment to a fixed wiring system in accordance with national wiring
regulations.
EN
11