In this case we have Factory Patch Piano Snd, indicated by code F01, only one Zone exists, and it is enabled.
In this situation the Patch has 4 Zones, of which Zone 2 and Zone 3 are in mute while Zone 1 and Zone 4 are enabled.
•
Patch/Zone Midi is the page where the Midi channels corresponding to the enabled zones are displayed.
From this page on it is possible to pass to Zone Mode; by pressing the button relative to the selected Zone you go to
Midi Zone , in such way with Dial you can vary the Midi channel parameter, range is from 1 to 16, with Off the channel is
disabled.
Patch/Zone Program is the page where the ProgramChanges relative to the enabled Zones are displayed.
•
Pressing the button relative to the selected Zone you go to Zone Program, in such way with Dial you can vary the
Programchange parameter, range is from 0 to 127, with Off it is disabled.
i n s t r u c t i o n m a n u a l
English
14