Sony UP-X898MD Kurzeinführung Seite 23

Caution
Do not use the FS-24 in a place (such as an operating
room) exposed to liquids, etc., since the FS-24 conforms
to IPX3 waterproof Ingress Protection Rating. In such a
place, use a product which conforms to IPX6 or higher.
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of a flammable
anesthetic mixture with air or with oxygen or
nitrous oxide:
Not suitable for use in the presence of a
flammable anesthetic mixture with air or with
oxygen or nitrous oxide
Mode of operation:
Continuous
The design and these specifications are subject to
change without prior notification.
Notes
• Always verify that the unit is operating properly before
use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF FAILURE TO PRINT CONTENT OF
ANY TYPE OR LOSS OF DATA DUE TO FAILURE
OF THIS UNIT OR ITS PRINTING MEDIA,
ASSOCIATED SOFTWARE, EXTERNAL
STORAGE, OR OTHER EXTERNAL DEVICE.
• SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT OR
MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF ANY
SERVICES RELATED TO THIS UNIT THAT MAY
RESULT DUE TO CIRCUMSTANCES OF ANY
KIND.
If the unit is suddenly taken from a cold to a warm
location, or if ambient temperature suddenly rises,
moisture may form on the outer surface of the unit
and/or inside of the unit. This is known as
condensation. If condensation occurs, turn off the unit
and wait until the condensation clears before operating
the unit. Operating the unit while condensation is
present may damage the unit.
The life expectancy of the electrolytic capacitor is
about 5 years under normal operating temperatures
and normal usage (8 hours per day; 25 days per
month). If usage exceeds the above normal usage
frequency, the life expectancy may be reduced
correspondingly.
If this unit is to be used together with devices that emit
strong radio waves, such as a radio knife, always
verify that the unit is operating properly before use and
ensure that there is no failure of the unit.
The supplied Thermal Print Media (High Glossy)
paper (UPP-110HG) is used for the test operation. If
you will use this paper in the future, purchase the
printer papers (sold separately) (page 10).
Adobe and Adobe Reader are trademarks of Adobe
Systems Incorporated in the United States and/or other
countries.
11
GB
Specifications