Technical Specifications - HQ Power VDP250MHS16 Bedienungsanleitung

f. Control Board Operation
Mode
PAN Pan movement in positive or negative direction
TILT Vertical movement in positive or negative direction
Addr DMX address setting
Reset
rESET
Rainbow colour wheel change colour linear or stepping
COLI
RUN Working mode
Lamp switch
LAMP
Software version
VEr
Lamp hot
HEAT
Lamp error
LA.Er
CONTROL BOARD OPERATION:
1. Select working mode by pressing MODE.
2. Press ENTER to confirm the selection.
3. Press UP and DOWN to select working condition.
4. Press ENTER to confirm the selection.
7. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections ...
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts, apart from the lamp and the fuse (see "Installation").
8. Contact your dealer for spare parts if necessary.

8. Technical Specifications

Optical system
Power Supply
Power Consumption
Lamp
DMX channels
Luminance
Fuse
Dimensions
Total Weight
Max. Ambient Temperature
Max. Housing Temperature
The information in this manual is subject to change without prior notice.
VDP250MHS16
Function
linear electric focus
Motorized multi-step zoom with five different apertures ( 15°, 18°, 21°, 24° and 26°)
max. 230VAC / 50Hz
max. 500W
1 x 250W MSD lamp (order code: LAMP250MSD/2SYL (Sylvania) (incl.),
LAMP250MSD (Philips) (not incl.), LAMP250MSD/2 (low cost) (incl.))
Low cost lamp included only for testing the device.
16 channels
18000 LUX
T3.15A, 230VAC
400 x 400 x 476mm
26kg
45°C
80°C
7
Condition
YES – negative direction
YES – negative direction
YES - reset
YES - linear
OFF – DMX 512 mode
PR – Automatic
SLAE – Slave mode
ON – Lamp ON
OFF – Lamp OFF
VELLEMAN