Operation - HANSGROHE Variarc 14872 Serie Montageanleitung

Assembly
The fitting must installed, flushed and
tested after installation!
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the sink.
3. Slip the plastic washer, the slide washer, the
metall washer and collar over the hoses and
threaded base and tighten the collar nut by
hand. If there is not enough space, please use
only the slide washer and the metal washer
without the plastic washer.
4. Tighten screws.
5. Connect the supply pipes to the isolation val-
ves; cold right - hot left.
6. Connect the hose with hose nut, taper sleeve,
disc and washer.
7. Mount the hose weight - be careful by the
max. drawn out, otherwise the hose could be
crack.
The hot and cold water supplys should be of equal
pressures.

Operation

Move to the left = cold water,
move to the right = hot water.
The handspout / handspray can be drawn approx.
45 cm out of the arm lining.
14877XXX: The handspray is activated by pressing
the button. After releasing the button, the mixer
returns automatically to the standard function.
If the waterflow drops, clean the filter located bet-
ween hose and handspray.
Technical Data
Operating pressure:
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.: 65° C
Rate of flow aeratorspray:
Rate of flow showerspray:
Anti-pollution function
English
max. 1 MPa
1,6 MPa
max. 80° C
ca. 9 l/min 0,3 MPa
ca. 11 l/min 0,3 MPa
Hansgrohe single lever mixers can be used toge-
ther with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa.
To adjust the hot water limiter on single lever
mixers, please see page 14.
No adjustment is necessary when using a conti-
nuous flow water heater.
Attention!
The non return valves must be checked regularly
according to DIN EN 1717 in accordance with
national or regional regulations (at least once a
year).
Spare parts (see page 3)
1 handle
1.1 screw cover
2 flange
3 nut
4 cartridge cpl.
5 locking screw for handle
6 aerator cpl.
7 fixing set
8 spout
9 pull out spout
10 pull out handspray
11 non return valve DW15
12 connection hose 900 mm
13 connection hose 350 mm
14 hose 1750 mm
15 fixing set for hose connection
XXX = Colors
000 chrome plated
750 alux
800 steel
10490XXX
96338000
96468XXX
96461000
92730000
96059000
13913000
95049000
96918XXX
96919XXX
96920XXX
94074000
96316000
98601000
96921000
96099000