CONDTROL HYDRO PRO Bedienungsanleitung Seite 7

WOOD AND CONCRETE
EN
MOISTURE METER
Averaged measurement
Press and hold
Activate averaged measurement mode
Perform 5 measurements in different sections of the
Press
controlled sample
The measurement result is automatically stored
in the memory. Averaged measurement result is
highlighted in green on the display
Press and hold Exit averaged measurement mode
Measurements by external sensor
Conneсt the external The device will automatically switch to the humidity
sensor to the device and air temperature measurement mode.
The values of equilibrium humidity (EMC) and dew
point (Tp) appear on the display
12
HYDRO PRO CONDTROL
User manual
WOOD AND CONCRETE
EN
MOISTURE METER
Memory
Hold measurement result on the display (pause).
Press
Measurement result is automatically stored in
the memory.
while measurement
If the result is 0.0%, it cannot be held and stored
in the memory
Press View measurement results in memory
Press or Flip through measurement results in memory
Press Clear the memory
Press Exit the memory
HYDRO PRO CONDTROL
User manual
13