Technical Data; English (Original Instructions) - DeWalt DWE7492 Originalanweisungen

TABLE SAW
DWE7492
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Motor power (input)
Motor power (output)
No load speed
Blade diameter
Blade bore
Blade body thickness
Riving knife thickness
Depth of cut at 90°
Depth of cut at 45°
Bevel angle
Maximum bevel angle
Mitre angle
Ripping capacity
Overall dimensions
Weight
Noise values values (triax vector sum) according to EN62841-3-1:
L (emission sound pressure level) dB(A)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
The noise emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared noise emission level represents
the main applications of the tool. However, if the tool is
used for different applications, with different accessories
or poorly maintained, the noise emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
WALT one of the
e
DWE7492-QS
V 230
AC
1
W 2000
W 1200
min -1 4800
mm 250
mm 30
mm 2.0
mm 2.3
mm 77
mm 55
º 45–90
º 45–90
º 30–90
mm 825
mm 680 x 650 x 330
kg 26.5
92.0
dB(A)
105.2
dB(A)
2
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Table Saw
DWE7492
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015 + AC:2015,
EN62841-3-1:2014 + AC:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
26.06.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.
EnGLIsh
WALT at
e
WALT.
e
39