Unpacking - DeWalt DWE7492 Originalanweisungen

Lock/unlock cover at the main switch.
Unplug saw before changing blade
Protect the supply cord/plug against humidity and
sharp edges of saw blade
Date Code Position (Fig. A)
The Date Code 51 , which also includes the year of
manufacture, is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A, B)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Table
1
Blade
2
Rip scale indicator
3
Fine adjust knob
4
Rail lock lever
5
Blade height adjustment wheel
6
Bevel lock lever
7
ON/OFF switch
8
Mounting holes
9
Mitre gauge
10
Blade guard assembly
11
Blade guard release lever
12
Splitter
13
Dust exhaust port
14
Guard dust exhaust port
15
Throat plate
16
Rip fence
17
Rip fence latch
18
Work support/narrrow rip fence (shown in stored position)
19
Blade wrenches
20
Push stick (shown in stored position)
21
Carrying handles
50
Non-through cutting riving knife
52
(shown in storage position)
Intended Use
DWE7492 table saw is designed for professional ripping, cross-
cutting, mitreing and bevelling with various materials as wood,
wood composite materials and plastics.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT use for cutting metal, cement board, or masonry.
DO nOT use shaping cutter heads on this saw.
DO nOT perform tapered cuts without a tapered jig accessory.
DO nOT use the saw for plunge or cove cutting.
These table saws are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision. This product is not intended for use
by persons (including children) suffering from diminished
physical, sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a person
responsible for their safety. Children should never be left
alone with this product.
ASSEMBLY

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

Unpacking

• Remove the saw from the packaging material carefully.
• The machine is fully assembled except for the rip fence,
blade guard assembly, mitre gauge, blade wrenches, and
dust extraction reducer port.
• Finalize the assembly following the instructions as
described below.

WARNING: Always keep the push stick in its place when
not in use.
Mounting the Saw Blade (Fig. A, C)

WARNING: To reduce the risk of injury, turn unit
off and disconnect machine from power source
before installing and removing accessories, before
adjusting or changing set-ups or when making
repairs. An accidental start-up can cause injury.

WARNING: When mounting the saw blade, wear
protective gloves. The teeth of the saw blades are very
sharp and can be dangerous.

WARNING: The saw blade MUST be replaced as described
in this section. ONLY use saw blades as specified under
Technical Data. We suggest DT4226. NEVER fit other
saw blades.

WARNING: Do not touch the saw blade after working
before it has cooled. The saw blade becomes very hot
while working.
nOTE: This tool has blade installed from factory.
1. Raise the saw blade arbor to its maximum height by turning
the blade height adjustment wheel
EnGLIsh
6 clockwise.
45