Control With Reduction Switch - Vimar 20440 Montageanweisungen

5.3 - Control with reduction switch.

It is possible to force the thermostat onto the reduced temperature
with a switch .
If the thermostat is on the Comfort temperature, closing the
contact connecting the terminal
activate the reduced temperature .
For the switchover to take place, the contact must stay closed
for at least 10 s .
On turning off the switch, the thermostat will return to the previously
set function .
to line L with the switch will
Switch
L
N
Warnings.
Phone dialler control has priority over reduction control .
The switches must have clean contacts (luminous switches must not
be used) and the maximum distance must not exceed 100 metres.
ENGLISH - 19