Vitek VT-4272 BK Betriebsanweisung Seite 7

on automatically. In this case the keep warm
mode indicator (13) will be flashing after such
programs are started.
After such cooking program is finished, the mul-
ticooker will be switched to the keep warm mode
automatically. The keep warm indicator (13) will
stop flashing and will light constantly, the symbols
«00:00» will appear on the display (3) and the count
of the keep warm time will start. The bowl tempera-
ture will be maintained for 24 hours and the display
(9) will show the bowl bottom temperature.
Note:
•
In the keep warm mode the bowl bottom tem-
perature is maintained at 70-75°C.
•
Despite the unit keeps the ready dish warm
for 24 hours, it is not recommended to leave
the food in this mode for too long, because
this may spoil the food.
To switch the keep warm mode off press and hold
the «MAINTAIN t°/CANCEL» button (13) for more
than 2 seconds. The keep warm mode indicator
(13) will go out, the symbols «00:00» will appear
on the display (3) and the bowl bottom tempera-
ture will appear on the display (9). After that the
unit will be switched to the standby mode.
To switch the keep warm mode on, press the
«MAINTAIN t°/CANCEL» button (13), the symbols
«00:00» will appear on the display (3) and the
count of the keep warm time will start, the cook-
ing program indicators will not light up.
6. Changing the cooking time.
After the desired cooking program is selected
(see paragraph 2), the default cooking time for
this program will be shown on the display (3).
To change the cooking time, press the «t°С/
TIME» button (16), the time symbols on the dis-
play (3) will start flashing. Use the «–» (17) and
«+» (19) buttons to decrease or increase the
cooking time according to the table above. After
setting the cooking time, press the «START» but-
ton (14). The countdown of the set cooking time
will be shown on the display (3).
Note: Press and hold down the «–» (17) and
«+» (19) buttons to set the time quicker.
7. Delayed Start
After selecting the desired cooking program
(see paragraph 2) press the «Delayed start» but-
ton (20), the button indicator will light up and
the time indications on the display (3) will start
flashing. Use the «–» (17) and «+» (19) buttons
to set the delayed start time. After you finish set-
VT-4272.indd 7
ting the time press the «START» button (14), the
countdown of remaining time will start on the
display (3) and the multicooker will switch to the
standby (delayed start) mode.
•
Maximal delayed start time you can set is
24 hours, the minimal time is 5 minutes.
•
In the standby (delayed start) mode the
«Delayed start» button (20) indicator will
be glowing constantly and the time until the
cooking start will be shown on the display (3).
• When the set time expires, the button (20)
indicator will go out and the multicooker will
start cooking.
•
In the delayed start mode you can control the
keep warm mode.
•
To cancel the delayed start press and hold
down the «MAINTAIN t°/CANCEL» button (13)
for more than 2 seconds. The multicooker will
switch back to the standby mode and will be
ready for selecting a new cooking program.
8. Changing the cooking temperature
Changing the cooking temperature is avail-
able only in the Multicook mode.
After selecting the «MULTICOOK» program the
default cooking temperature for this program will
be shown on the display (9). To change the cook-
ing temperature press the «t°С/TIME» button (16)
twice, the temperature indications on the display
(9) will be flashing. Use the «–» (17) and «+» (19)
buttons to decrease or increase the cooking tem-
perature. After setting the cooking temperature
press the «START» button (14), and the multi-
cooker will start the cooking process.
«MULTICOOK» PROGRAM
The «Multicook» program allows you to change
the cooking temperature within the range from
30°C to 150°C and the cooking time from 5 min-
utes to 10 hours in accordance with your needs
and preferences.
After the «MULTICOOK» program is selected (see
paragraph 2), the default cooking temperature
for this program will be shown on the display (9)
and the default cooking time for this program will
be shown on the display (3).
To change the cooking time press the «t°С/TIME»
button (16) once (see paragraph 6) and to change
the cooking temperature press it twice (see para-
graph 8).
After setting the cooking temperature and time
press the «START» button (14), and the multi-
cooker will start the cooking process.
7
ENGLISH
28.04.2016 11:01:42