Vitek VT-4272 BK Betriebsanweisung Seite 5

• To avoid damage of the non-stick coating do
not put the bowl (21) into cold water immedi-
ately after cooking; let it cool down preliminarily.
•
The bowl (21) is not intended for washing
in the dishwashing machine.
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature keep it for at least three hours
at room temperature before switching on.
Unpack the unit, remove any stickers and
–
package materials that can prevent multi-
cooker operation.
Place the multicooker on a flat heat-resistant
–
surface away from all kitchen heat sources
(such as a gas cooker, electric cooker or
cooking unit).
Place the unit keeping at least a 20 cm gap
–
between the multicooker body and the wall
and 30-40 cm of space above the unit.
Do not place the multicooker close to objects
–
that can be damaged by the released steam
of high temperature.
Attention! Do not use the unit near bath tubs,
kitchen sinks or other containers filled with
water.
Open the lid (4) by pressing the button (5) and
–
pulling the handle (6).
Wash all the removable parts – the bowl (21),
–
steam cooking basket (22), soup ladle (23),
spatula (24) and measuring cup (25) – with a
soft sponge with neutral detergent, then rinse
under running water and dry.
Clean the unit body with a damp cloth, then
–
wipe it dry.
USING THE MULTICOOKER
ATTENTION!
•
Never leave the operating unit unat-
tended.
•
During the first operation of the multi-
cooker, some foreign smell from the heat-
ing element can appear. It is normal.
• Before you start cooking make sure that
the multicooker lid is closed tightly to
avoid bad cooking caused by disrupted
heat-insulation.
•
To avoid burns be very careful when open-
ing the lid (4), do not bend over the steam
release openings (7) during unit operation
and do not place open parts of your body
above the bowl (21)!
VT-4272.indd 5
• Do not touch the upper lid (4), especially
its transparen part during the multicooker
operation.
•
Watch the food during cooking and, if nec-
essary, stir the products with the plastic
soup ladle (23) or spatula (24). Do not use
metal objects that can scratch the non-
stick coating of the bowl (21).
• Do not leave the plastic soup ladle (23) or
spatula (24) in the bowl.
• You may use the holder (loop) on the unit
body to store the soup ladle (23) or spat-
ula (24).
Note:
The keyboard on the front panel of the multi-
cooker is touch-sensitive, so you only need to
touch slightly the marked point for each button
to activate it. Every pressing of the buttons is
accompanied by a short sound signal.
1. Unit connection (standby mode)
After connecting the multicooker to the mains
you'll hear a short sound signal, and then the
symbols «00:00» will appear on the display (3)
and the display (9) will show the bowl bottom
temperature. The unit is switched to the standby
mode and ready for use.
2. Selecting and starting
the cooking program
Press the «MENU» button (18) consequently,
the indicators of cooking programs (15) and the
«START» button (14) will be flashing alternately
on the control panel, and the cooking (default)
time will be shown on the display (3). You can also
use the buttons «–» (17) and «+» (19) to switch to
the previous cooking program or select the next
one. After selecting the desired cooking progam
press the «START» button (14), and the cook-
ing process will start; the indicator of the corre-
sponding cooking program will light up and the
other cooking program indicators will not. The
countdown of the remaining time of the selected
cooking program will be shown on the display (3).
Note:
• To select the Cooking program quicker press
and hold the «–» (17) and «+» (19) buttons.
•
If no button is pressed after selecting the
required program, after some time (~100 sec-
onds) you will hear 15 short sound signals and
the unit will switch back to the standby mode
and will be ready for selecting a new cooking
program.
5
ENGLISH
28.04.2016 11:01:42