Cleaning And Maintenance - Eldom R100 Bedienungsanleitung

photo 3
BLENDER OPERATION
- before connecting the blender (7) make sure the appliance is unplugged and the switch (2)
is set in the position "0"
- remove the housing (8) in the back part of the body of the mixer (4)
- insert the blender (7) on that position and turn it clockwise, photo 3
- plug in the appliance
- the mixer starts its operation after a proper speed is selected with the switch (2).
After pressing the "TURBO" button (3) we obtain the maximum speed.
When the appliance is no longer used, set the switch (2) in the position "0" and unplug the
appliance.
Disassemble the blender (7) by turning it counter clockwise.

CLEANING AND MAINTENANCE

Before cleaning, unplug the appliance.
Do not wash the appliance in a dish-washer machine.
Do not immerse the body (4) in water.
Clean with a damp cloth or towel.
Do not immerse completely the blender (7) in water.
Only the ending with the knife can be immersed.
Complete immersion of the blender (7) may result in the knife seizure and the warranty loss.
Do not clean the knife with bare hands. Use a brush for cleaning.
Other components of the appliance can be washed in warm water with a dishwashing
liquid.
Do not clean the appliance with sharp, abrasive cloths or sponges as it may destroy the
appliance.
Blender knife is an operating component and is
not covered by the warranty.
6