Firmware Update; Dismounting - OSRAM e:cue SYMPL relay Node Installationsanleitung

Click the "open" button of a relay to close the relay. Open it again by
clicking the button (now "closed") anew.
Exit the Test mode by leaving the Test mode page, e.g. go to "Dashboard",
or by double-pressing the Identify button.
7

Firmware Update

To update the SYMPL relay Node, a connection of the SYMPL relay Node
to SYMPHOLIGHT is required.
Updating with SYMPHOLIGHT
Use the usual update options in the Device Tree of the Setup tab in
SYMPHOLIGHT: select "Update firmware" in the context menu of the
SYMPL relay Node or click the Update button
8

Dismounting

Disconnect all attached cables. Dismount the e:cue SYMPL relay Node
from the rail by pulling the black DIN rail handle and unhitching the SYMPL
Node. The dismounting is completed.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
Firmware Update
in the head toolbar.
21