Default Network Properties; Network Configuration With Sympholight - OSRAM e:cue SYMPL relay Node Installationsanleitung

on configuration, available at www.ecue.com.
The network properties of the SYMPL relay Node are preconfigured. The
successful installation of the power supply is required for changing the
network configuration. You can either adjust the network settings with
SYMPHOLIGHT or using the web interface of the SYMPL relay Node.
5.1

Default network properties

The SYMPL relay Node has as factory setting the default IP address
192.168.123.1.
DHCP is enabled by default.
Login credentials for the web interface of the SYMPL relay Node:
The default password is: ecue
To change the network configuration use either SYMPHOLIGHT or the web
interface of the SYMPL relay Node:
5.2

Network configuration with SYMPHOLIGHT

1. Open the context menu of the SYMPL relay Node in the Setup tab
of SYMPHOLIGHT by a right-click on the device.
2. Select "Configure Network":
Network configuration
17