Power Supply; Network Configuration - OSRAM e:cue SYMPL relay Node Installationsanleitung

Network configuration

The appropriate pin assignment is defined as follows:
From left to right: NO, NC, COM.
4.5

Power supply

The e:cue SYMPL relay Node can be powered by an external power supply
or via Power-over-Ethernet.
PoE:
For PoE, simply connect an Ethernet connection from a power sourcing
device.
External power supply:
Connect the SYMPL relay Node to a certified NEC Class 2 24 V DC power
supply unit. Present power supply equates to the status "On" or running of
the SYMPL Node.
To connect the device to a power supply unit, use the provided 2-pole
terminal and lay the wires as stated on the front label. The voltage
assignment is left V+ and right V-.
Turn the power on when all cables are connected to the SYMPL relay Node.
The device starts booting. The device has finished booting and is in
operation when the LED Status is flashing.
The SYMPL relay Node is not suited for powering over a DC
!
power supply network. Use a separate certified SELV Class 2
power supply unit in the control cabinet for supplying 24 V
DC to the SYMPL relay Node.
5 Network configuration
The configuration of the e:cue SYMPL relay Node is completely done via
e:cue SYMPHOLIGHT. See the SYMPHOLIGHT System Manual for details
16