Troubleshooting - FIMAR AGR Benutz Und Wartungsanleitung

For long periods of disuse, after cleaning and turning off appliance power (or unplug-
ging the power cord), adequately cover it to keep it clean.

TROUBLESHOOTING

The purpose of the following information is to help the operator to identify and correct
any anomalies or malfunctions that may occur during use.
Some faults may be resolved by the user, others require specific technical skills or abi-
lities and must only be performed by qualified personnel with recognised experience in
the specific sector.
Important
Do not remove internal appliance parts.
The manufacturer is not liable for any machine tampering!
Table 4: Operating malfunctions
Problem
The equipment does not start.
Excessive vibrations
No juice flows.
Translation of the original instructions
Causes
Main switch off.
No mains power.
The handle was not correctly
closed.
Fuse burnt-out.
The tool and/or basket were not
correctly assembled.
Product accumulation (pulp) on
the tool.
Product accumulation (pulp) on
the tool.
Food product too pulpy or too
ripe.
- 15 -
CENTRIFUGE
Solutions
Turn on main switch.
Contact your dealer or
authorised service centre.
Close the handle on the lid.
Contact customer service.
Check correct assembly.
Clean
Clean
Change food product type.
English language
CFV30
GB