OHAUS BW Series Handbuch Seite 17

6. "kg" s dsplayed. Ths s the Calbraton Weght Unt. Press ON/OFF-Yes to
accept and move on to the next parameter.
7. "xxxx" s dsplayed. Ths s the Full Scale Capacty of the scale, where:
"1500" = 1.5kg, "3000" = 3kg, "6000" = 6kg, "15000" = 15kg. Make
sure the dsplayed value matches the scale model capacty then press ON/
OFF-Yes to accept and move on to the next parameter.
8. "- - - - - -" s dsplayed. Make sure the pan s empty and stable at ths tme
then press ON/OFF-Yes. The dsplay wll count down from 5 to 1 as the
scale zero s regstered.
9. "xxxx" s dsplayed. Ths s the Calbraton Pont correspondng to 2/3 of
the Full Scale Capacty value. Place the ndcated calbraton weght on
the center of the pan. Wth the scale stable, press ON/OFF-Yes. The dsplay
wll count down from 5 to 1 as the scale regsters the calbraton weght.
10. "xxxx" s dsplayed. Ths s the Calbraton Pont correspondng to the Full
Scale Capacty value. Place the ndcated calbraton weght on the center
of the pan. Wth the scale stable, press ON/OFF-Yes. The dsplay wll
count down from 5 to 1 as the scale regsters the calbraton weght.
11. "SAVE" s dsplayed when calbraton was regstered. Remove the
calbraton weght, then press ON/OFF-Yes. The scale wll dsplay a self-
test then return to normal weghng mode.
Note: At any tme durng the calbraton process, press CHECK-Back to revert to the
prevous parameter, or long-press ON/OFF to turn off the scale and abort the process
wthout savng any changes.
BW SERIES COMPACT BENCH SCALE EN-9