Cleaning And Care - Vitek VT-1885 B Betriebsanweisung

ENGLISH

CLEANING AND CARE

Remove garbage and dust from the dust bin (17) after
each usage of the vacuum cleaner and clean the filters
(4, 13) and the dust bin (17) regularly.
•
After using the unit with installed extension pipe
(21), remove the pipe (21) before removing the
dust bin (17) (pic. 6).
•
Remove the extension pipe (21), pressing the but-
ton (2) and pulling the pipe.
•
Holding the dust bin (17), press the button (9) and
carefully take the bin off.
•
Open the lower lid (15) of the dust bin (17) by
pressing the clamp (16) downwards (pic. 7).
•
Remove accumulated dust and garbage from the
dust bin (17).
•
Wash the dust bin (17) under warm running water.
Do not wash the dust bin (17) in a dishwashing
machine.
•
Clean the mesh filter (13) and separator (14) with a
slightly damp soft cloth, and then wipe dry (pic. 7).
You can use a vacuum cleaner with a correspond-
ing attachment to clean the filter (13) and separator
(14). Do not wash the filter (13) and the separator
(14) with water, it can cause damage.
Note: Dry the dust bin (17) thoroughly before install-
ing it back to its place.
•
Install the dust bin (17) back to its place (pic. 9).
Removing and cleaning the outlet filter (4)
•
Press the clamps (6) and remove the outlet filter
holding lid (5) (pic. 10).
•
Remove the outlet filter (4) from the holder, wash
the filter (4) under slightly warm water jet. Dry
the filter thoroughly before installing it back to its
place. Do not wash the outlet filter (4) in a dish-
washing machine.
•
Install the outlet filter (4) on the holder and set the
outlet filter holding lid (5) back to its place (pic. 11).
Attention! Keep the filters (4, 13) clean because
the performance of the vacuum cleaner depends
on it; clean the filters (4, 13) regularly.
Cleaning the vacuum cleaner body
•
Clean the vacuum cleaner body with a soft, slightly
damp cloth and then wipe it dry.
•
Never immerse the vacuum cleaner body and the
power adapter into water or other liquids. Provide
that no water gets inside the vacuum cleaner body.
•
Never use solvents or abrasives to clean the sur-
face of the vacuum cleaner.
Cleaning the electric brush
Switch the vacuum cleaner off and remove the elec-
tric brush (20), remove threads and hairs wound up
around the cylindrical brush.
VT-1885.indd 6
If the cylindrical brush does not rotate during opera-
tion:
•
switch the vacuum cleaner off, remove the brush
(20), press the cylindrical brush clamp in the direc-
tion of the arrow and remove the cylindrical brush
(pic. 12);
•
clean the cylindrical brush off threads and hairs;
•
press the clamp and install the cylindrical brush
back to its place (pic. 13).
STORAGE
•
Before taking the vacuum cleaner away for stor-
age, clean the unit body and the dust bin.
•
Keep the vacuum cleaner away from children in a
dry cool place.
Delivery set
Vacuum cleaner (with the filters and the dust bin
1.
installed) – 1 pc.
Rechargeable battery – 1 pc.
2.
Extension pipe – 1 pc.
3.
Electric brush – 1 pc.
4.
Crevice nozzle – 1 pc.
5.
Combined attachment – 1 pc.
6.
Instruction manual – 1 pc.
7.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Maximal power: 200 W
Suction power: 60 W
Dust bin capacity: 0.35 L
Rechargeable battery: 22.2 V, Li-Ion 1500 mA/h
The manufacturer preserves the right to change
design and specifications of the unit without a
preliminary notification.
Unit operating life is 5 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance was
purchased. The bill of sale or receipt must be pro-
duced when making any claim under the terms of this
guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low Voltage
Regulation (2006/95/ЕС)
6
28.07.2014 16:09:51