Silvercrest SRK 3.7 A1 Bedienungsanleitung Seite 12

4) Check whether the charging socket cover
socket . Close the charging socket
water can get into the charging socket
5) Select a speed setting:
― Press the On/Off button
the 3 control lamps on the On/Off button
3 seconds. Afterwards, all of the control lamps light up.
― Press the On/Off button
the 3 control lamps on the On/Off button
3 seconds. Afterwards, all of the control lamps light up.
― Press the On/Off button
The control lamps on the On/Off button
We recommend starting with speed setting 1 so that your skin can get
used to the treatment. Use the speed setting that feels most comfortable
to you.
6) Once you have selected the required speed setting, move the appliance
with circular motions over the areas of skin being treated. Apply as much
pressure as you are comfortable with.
NOTE
► If you are using the appliance to froth up shower gel or soap, first apply
the shower gel or soap to your wet skin and then froth it up with the
appliance.
7) When you are finished with application, press the On/Off switch
repeatedly until the appliance is switched off.
NOTE
► After a dry application, we recommend you shower afterwards and
apply skin care oil or lotion.
SRK 3.7 A1
is correctly fitted in the charging
correctly, if required, so that no
.
once to select speed setting 1. One of
again to select speed setting 2. Two of
a third time to switch off the appliance.
go out.
GB │ IE │ NI │ CY
lights up for approx.
light up for approx.
│
9 ■