7- Use And Operation; Command Panel - Maxima DELUXE series Gebrauchs - Und Wartungsanweisungen

7.1- COMMAND PANEL

The command panel is installed in the front side of the oven and is differentiated according to the models,
as indicated in FIG.7 (electromechanical model) FIG.7/A (digital model).
FIG.7
(Command panel of electromechanic model)
2
1
12
11
10
9 8
FIG.7/A
(Command panel of digital model)
14
4
1
2
1
2
5
3
3
1 "On - Stand
2
"Economy"
3
"Light Room"
4
/ "Temperature
5 and ceiling/
4
5
6 "Timer Set-
6
8
/ "Arrow down/
9
7
7
(1)
To exit the programming await 4 seconds without pressing any key
(2)
Keeping pressed the key "Timer Activation" you bring the timer in "STOP" and then arrange a
new cycle
R
EF NAME
.
1 Green light
2 Thermostat
Main switch (1-
3
0)
4 Thermometer
Room light
5
switch (I-0)
Pushbutton If pressed for at least 3 seconds it determines the igni-
tion (ON) or switching OFF (STAND-BY) of the regula-
by" tor
Pushbutton At the first pressure, the power is limited , at the sec-
ond, it is deactivated.
Pushbutton At the first pressure the lights of the cooking room go
ON; at the second, they are switched OFF.
Pushbutton If pressed and released, it displays (Ref.11/12) the cur-
to set rent value of temperature set, the luminous indicator
placed on the right of the display blinks to indicate that
a procedure of setting that can be performed within the
base" following 4 seconds is in pogress;
Function "Delayed Ignition": If pressed and released
(with status of oven in STAND BY) displays on the dis-
Pushbutton
play (Ref.10) the current value of the time in minutes
that has been set, the luminous indicator "h" blinks to
ting"
indicate that it is in progress a procedure of setting that
can be performed within the 4 following seconds;
Pushbutton Decreases/increases the value showed in the display
By pressing it, it is silenced the acoustic alarm in case
up"
of end of counting or alarm;
Pushbutton Starts the process of delayed ignition (with status of the
"Start" oven in STAND BY)
.
USE AND OPERATION -7
LEGEND FIG.7
FUNCTION
When ON it indicates the operation of the
resistance in use.
Pos.0:
It deactivates the operation of the
resistance
Pos. 50 ÷ 500 °C:
It activates the opera-
tion of the resistance and sets the
desired temperature .
Pos. I:
It activates the oven operation ;
Pos. 0:
It deactivates the oven operation .
It indicates the temperature in the cooking
room.
Pos. I:
Switches on the light ;
Pos. 0:
Switches off the light .
Instructions for use and maintenance
(1)
Rev. 02/2009 - EN