Connections And Settings; Connections With The Es-7 Editstation - Sony Disk unit ESBK-7046 Bedienungsanleitung

Connections and Settings

Important note on SCSI connections
When making SCSI connections, plug the connector at
the end of the SCSI cable firmly in the matching
connector on the device until it is locked in place.

Connections with the ES-7 EditStation

Notes
• Before connecting this unit, install the ESBK-7041
Disk Recorder Board in the ES-7 EditStation.
Rear panel of disk
unit (this unit)
SCSI 4 IN
SCSI cable (supplied)
SCSI cable (supplied)
ES-7 EditStation
ESBK-7041 Disk
Recorder Board
SCSI 3 IN SCSI 1 IN
SCSI 2 IN
To AC power supply
SCSI cable (supplied)
SCSI cable (supplied)
• Be sure to power the ES-7 EditStation off before
connecting this unit. Connecting the unit with the
ES-7 powered on can result in damage to this unit or
the ES-7.
SCSI 3
SCSI 4
SCSI 1
SCSI 2
To AC power
supply
17