Set Alarm Time; Reset Complete Device Back To Factory Settings - TIPTEL 272 Bedienungsanleitung

Set Alarm Time

In off-hook status press and hold
select the hour. Press
the minutes. Press
Use to switch on/off the alarm at any time.
If the alarm is on, a clock-symbol will show up in the lower right corner of the
display. If the alarm time is reached the phone starts ringing with a special melody.
The volume of this signal is equal to the ringer volume setting.

Reset complete device back to factory settings

In on-hook mode, press
This clears all memory (incl. Phone Book) and all settings. The device is back to
initial factory setting after some seconds.
Operation
for a minimum of 3 seconds. Press
to confirm and change to minutes. Press
to confirm. Go on-hook.
for more than 8 seconds until the display goes blank.
17
to
to select
e
n
g