Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When you are on a call and another caller is trying to get through, the Call Waiting
beep will sound to alert you.
1.
Press (R) to put your current call on hold and accept the waiting call.
2.
Press (R) again to alternate between the two calls.
Setting the flash time
You can set the flash time at 100 or 300 ms.
1.
Slide the flash switch on the side of the base to the desired setting.
Please, ask your network provider or PBX installer (in case this device is used
behind a PBX) for the appropriate setting.
Using the phone
34
Werbung
Kapitel
Inhaltsverzeichnis
