Beckhoff EP6224 Dokumentation Seite 53

Additional Code (IO-Link Spec)
Type
No details
Index not available
Subindex not available
Service temporarily not available
Service temporarily not available, local control
Service temporarily not available, device control
Access denied
Parameter value out of range
Parameter value above limit
Parameter value below limit
Interfering parameter
Application failure
Application not ready
EP6224 und EP6228
Wert Beschreibung
(Lo Byte, hex)
00 Device buffer is too small for storing the complete PDU
11 Calculated PDU checksum in master does not match actual re-
ceived SPDU
12 Calculated PDU checksum in device does not match actual re-
ceived SPDU
20 Violation of flow control rule during transfer of SPDU between
master and device
21 Unknown service primitive or wrong response e.g. Read Re-
sponse on Write Request
22 Unknown service primitive e.g. different protocol revision
23 Negative service response initiated by a communication error,
eg. IO-Link connection interrupted
30 Service PDU transferred, but not processed due to device er-
ror. See error details in Additional Code
31 Service PDU transferred, but not processed due to device er-
ror. See error details in Additional Code
32 Service PDU transferred, but not processed due to device er-
ror. See error details in Additional Code
40 Service PDU transferred, but not processed due to device er-
ror. See error details in Additional Code
81 Service PDU transferred, but not processed due to device er-
ror. See error details in Additional Code
82 Service PDU transferred, but not processed due to device er-
ror. See error details in Additional Code
Version: 1.5
Diagnose
53