Acoustic Signal; Using The Stopwatch - Auriol IAN 290882 Bedienungs- Und Sicherheitshinweise

If the watch is in time mode, press and keep
pressed the RESET button 4 . Simultaneously,
press the START button 2 to switch off the
alarm. The alarm symbol 7 disappears.
˜ Activating / deactivating the

acoustic signal

Note: An acoustic signal will sound every hour on
the hour.
When not in clock mode, press the MODE but-
ton 6 repeatedly until the time field 3 appears
in the display.
Press and keep pressed the RESET button 4 and
while doing this, press the MODE button 6 .
All the day of the week fields 1 appear. The
audible signal function is activated.
Press and keep pressed the RESET button 4 and
while doing this, press the MODE button 6 . All
the day of the week fields 1 disappear. The
audible signal function is deactivated.
˜ Using the stopwatch
When not in clock mode, press the MODE but-
ton 6 repeatedly until the time field 3 appears
in the display.
Press the MODE button 6 once to enter the
stopwatch mode.
Press the START button 2 to start the stopwatch.
Press the START button 2 again to stop the
stopwatch.
Press the RESET button 4 to set the stopwatch
to 0.
14 GB