Operation Instructions - Bartscher IK 20TC Gebrauchsanleitung

6.3 Operation instructions

•
Before the device operation clean it according to the instructions in section
7 „Cleaning ".
CAUTION!
Do not place empty cookware on the cooking surface.
Heating an empty pot or pan will activate the overheating protection
mechanism, an audio signal will sound and the device will switch off. The
error code „E02" will be displayed.
If this happens, remove the cookware from the cooking surface and leave
the device to cool off. Then, you may place a pot or pan with appropriate
content on the hog and switch on the device.
•
Place the food in a suitable cookware in the middle of the selected heating zone.
•
Insert the plug into an appropriate single outlet.
An audio signal will sound and the „Power" indicator light will be lit.
•
To switch on the induction cooker, press ON/OFF button
Function key indicator light
Settings
NOTE!
To simmer or cook food (max temperature of 170 ° C) select one of the
power levels.
To bake or fry in deep fat (max temperature of 240 ° C) select one of the
temperature ranges (60 ° C - 240 ° C).
•
Keep pressing function key
following sequence:
➨ ➨ ➨ ➨
Power
(Power)
•
Name of the selected operation mode is displayed on the control panel.
will begin flashing, and the lock button
to switch between different operation modes in the
Power + time
(Power + Timer)
➨ ➨ ➨ ➨ Temperature ➨ ➨ ➨ ➨
(Temp)
.
will be lit.
Temperature + time
(Temp + Timer)
- 35 -