Applications; System Architecture - Aventics ddl Betriebsanleitung

During operation
During cleaning
AVENTICS | DDL, DDL-E | 1987765499–BDL–001–AC
Do not put the system into operation before it is
W
completely assembled as well as correctly wired and
configured, and after it has been tested.
The device is subject to the restrictions of the IP 65
W
protection class. Before commissioning, make sure
that all the connection seals and plugs are leaktight to
prevent fluids or foreign bodies from penetrating the
device.
Make sure that there is a sufficient exchange of air or
W
enough cooling if your valve system has any of the
following:
– Complete equipment
– Continuously loaded solenoid valves
Never use solvents or aggressive detergents. Only
W
clean the device using a slightly damp cloth. Only use
water to do this and, if necessary, a mild detergent.
3

Applications

The bus coupler (Remote Slave Modul) is designed only
for use as a slave on a DDL bus system.
4

System architecture

The versatility and flexibility of this valve system enables
AVENTICS to support your automation tasks. The valves
are completely assembled and tested according to your
requirements; the electrical connection is made via
decentralised modules. The valve system in the local and
external pilot control versions is then ready for use. Its
modular construction allows existing systems to be
expanded or converted at any time.
The valve system's operating instructions are composed
of individual components.
41
Applications