Vitek VT-2519 BK Betriebsanweisung Seite 7

Hair thinning function
Hair thinning means cutting off separate locks.
It allows achieving smooth transition between
locks of different length. Hair thinning is
performed at the final phase of hair cutting.
To extend the hair thinning comb, move the
lock (4) to the utmost left position, to remove
the hair thinning comb, move the lock (4) to
the utmost right position.
Cleaning and care
–
–
–
–
–
–
–
–
Storage
–
VT-2519.indd 7
After the use switch the hair clipper off,
remove the power adapter from the power
socket and detach the adapter cord from
the unit body.
Clean the unit body with a soft, slightly
damp cloth and then wipe it dry.
Never immerse the hair clipper, the blade
block or the power adapter into water or
other liquids.
Detach the attachment from the unit body.
Use the brush (10) to clean the inside and
outside surfaces of the attachments from
the cut-off hair.
You can wash the attachment comb
(6) under a water jet, but then wipe the
attachment comb (6) dry.
Remove the blade block (5) by press-
ing on the upper part of the block on the
blades side. Clean the blade block (5) and
the inner cavity under the blade block (5)
with the brush (10). Install the blade block
(5) back to its place by inserting the block
lock into the groove on the unit body and
pressing the upper part of the block. A
click of the locks shows that the blade
block (5) is set properly.
Do not use solvents or abrasives to clean
the hair clipper set.
Lubricate the blades with oil (9) after every
use of the hair clipper.
Clean the hair clipper and lubricate the
blades with the lubricating oil (9) before
taking the unit away for storage.
– Keep the unit away from children in a dry
cool place.
Delivery set
1. Hair clipper with the blade block – 1 pc.
2. Attachment comb – 1 pc.
3. Power adapter – 1 pc.
4. Lubricating oil – 1 pc.
5. Brush – 1 pc.
6. Comb – 1 pc.
7. Scissors – 1 pc.
8. Instruction manual – 1 pc.
Technical specifications
Power adapter input power: AC (alternating
current)100-240 V ~ 50/60 Hz
Output voltage: DC (direct current) 3 V, 600
mA
Maximal power consumption: 3 W
The manufacturer preserves the right to
change the specifications of the unit without
a preliminary notification.
Unit operating life is 3 years.
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim un-
der the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС )
7
ENGLISH
03.10.2013 12:16:12