Werbung
GB
5) Push the Adjust buttons toward the vehicles anchorage until both
two connnectors are locked and the indicators show green on both
two sides.
5
6) Push the base towards the seat back, make sure the base is
Note: the adjust buttons on both two sides must in the same location
6
7) Push the support leg adjuster and adjust the support leg so that it
monitors at the base of the support leg must turn from red to green
Check that the front support leg clicks into position and is correctly
adjusted.
-
7
position on the base connection points (parts list n°10) Make sure
into place.
8
B004
12
Werbung
