Model Assembly - FMS F-16C V2 Bedienungsanleitung

E
N

Model Assembly

Main Wing Installation
1.Slide the tube into the fuselage then install both wings over
the wing tube and into the wing slot of the fuselage.
Notice: The connectors on both side should be attached
precisely and firmly.
2. Secure the wings on the fuselage using the included screws
as shown.
Horizontal Stabilizer Installation
1.With the bottom of the fuselage facing up, carefully apply CA
to the base and the side of the rear fuselage slot. Install the
stabilizer into the place. Ensure the control horn faces down as
shown.
Required Adhesives:
Foam Safe Medium CA
4